Free Ground Shipping Over $75
A Collection of World Class Car Care Products
Lake Country Flat Pads' durable foam compositions minimize heat build-up to protect the paint. The hook and loop backing covers nearly the entire back of each pad with it being "cutback" from the edge, providing a secure hold on the backing plate. The flat pads are excellent for large, flat panels. The foam stays in contact with the paint so you can work efficiently. Lake Country Flat Pads feature a thickness of 7/8" of an inch, as well as a reduced bevel for the perfect balance and control. The smooth feel and performance of the Lake Country Flat Pads allows for the perfect alignment of your backing plate for an overall increased experience.
Lake Country Flat Pads are available in the following varieties:
Yellow Cutting Flat Pad
Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and heavily swirled finishes. Always follow this pad with a white or gray pad and a fine polish to refine the paint until it is smooth.
Orange Light Cutting Flat Pad
Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.
White Heavy Polishing Flat Pad
Less dense foam formula for the application of cleaner waxes, one step polishes, or "all in one" type products. This pad has very light cutting power, so it's perfect for pre-wax cleaners.
Green Polishing/AIO Flat Pad
Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.
Blue Light Polishing Flat Pad
This pad is not as dense as the green polishing pad and provides little cutting ability. Generally used to polish to perfect, this pad will leave a high shine on the surface. Perfect for use with a finishing glaze, last-step polish, and some all-in-one cleaner polishes.
Black Finishing Flat Pad
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.
3.5 inch diameter
Use with 3 inch backing plates
