A Collection of World Class Car Care Products
Most paint swirls are caused by dirt and sand getting trapped in your sponge or mitt while you wash. The first time you re-wet your sponge in the bucket, some of the abrasive particles will come off the sponge into the water. Subsequent dips in the bucket will re-contaminate your sponge. These contaminants will then rub against your paint and produce swirls.
The Grit Guard Insert will get those particles out of your sponge or mitt. The raised radial surface fits in the bottom of any 5-gallon bucket and extracts grit from your wash mitt or sponge when you drag it across the Grit Guard Insert. The dirt settles at the bottom of the bucket, so your car wash solution stays clean. The Grit Guard Insert has a radial grid surface that scrapes dirt out of your mitt or sponge. Four quadrants at the base of the Grit Guard Insert calm the wash water and hold the grid above the bottom of the bucket. Dirt falls to the bottom and stays there. You’ll be amazed at how much dirt accumulates in the bottom of your wash bucket!
The Grit Guard Insert is solvent resistant and durable. It stands 2.5 inches off the bottom of the bucket and measures roughly 10 inches in diameter, perfect for any 12” diameter bucket. It is available in multiple different colors.
The Grit Guard Insert takes the grit out of your mitt for safer, swirl-free washing. This inexpensive item can save you countless hours and dollars spent removing swirls.
For optimum paint protection, stack two Grit Guards in one bucket. The stacked grids stand 5 inches above the bottom of the bucket and stabilize more water. The addition of a second Grit Guard Insert provides more clearance between the clean water at the top and the dirty water at the bottom to lessen the likelihood that a stray grain of sand will find its way to the top.