|
 |
Yellow Cutting Foams 7.5"- Use this pad to apply compounds or
polishes to remove severe oxidation, swirls, and scratches. It is the most
aggressive and should only be used on oxidized and older finishes. Always
follow this pad with an orange pad and a fine polish and then a white pad to
refine the paint until it is smooth.
|
 |
Orange Light Cutting Foam 7.5"- Firm, high density foam for
scratch and defect removal. Use this pad with polishes and swirl removers.
It’s an all around pad that will work on most light to moderate
imperfections |
 |
Coarse Green Cutting/Polishing Foam 7.5"- This foam is of medium density with the ability to level very fine scratches and very light oxidation. Use light swirl removers with this pad. |
 |
White Polishing Foam 7.5"- Less dense foam formula for the
application of waxes, micro-fine polishes and sealants. This pad has very
light cutting power so its perfect for pre-wax cleaners. |
 |
Gray
Finishing Foam 7.5" - Composition is firm enough to withstand
added pressure during final finishing to remove buffer swirls. It has no cut
and will apply thin, even coats of waxes, sealants, and glazes. |
 |
Blue
Finessing Foam 7.5"– This blue foam pad has soft composition for applying glaze, finishing polish,
sealants, and liquid waxes. The soft pad has no cut, making it perfect for applying nonabrasive products evenly. |
 |
Red
UltraSoft Foam 7.5"– This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability. |
