FREE Shipping

Pinnacle XMT Heavy Duty Swirl Remover Complete Kit with FREE BONUS

 X
Pinnacle XMT Heavy Duty Swirl Remover Complete Kit <font color=red><b>with FREE BONUS</font></b>
Item #XMT-9600-CCS
Our Price:$89.99
Enter Quantity

For a Limited Time receive the Pinnacle XMT Series Instructional DVD FREE with your purchase of this kit! Retail Value $12.99.



Eliminate severe scratches and oxidation with XMT #4!

If your vehicle suffers from severe oxidation, swirls, and scratches, the Pinnacle XMT Heavy Duty Swirl Remover Complete Kit is the answer! Eliminate cloudy oxidation, severe swirls and most scratches to restore a like-new luster to your vehicleís paint.

XMT Heavy Duty Swirl Remover #4 is a polishing compound intended for severe defect removal on single stage and clear coat paint. Warning: this is an intense swirl remover! XMT #4 is not for use on new or like-new paint finishes. Use it on an oxidized, rough finish; XMT #4 has amazing corrective properties and will restore the paint to a like-new shine.

The XMT Heavy Duty Swirl Remover Complete Kit includes XMT Series polishes and Lake Country foam buffing pads.


The XMT Heavy Duty Swirl Remover Complete Kit includes:

12 oz. XMT Heavy Duty Swirl Remover #4
XMT Heavy Duty Swirl Remover #4 is a true compound. It eliminates oxidation, severe swirls and scratches with a blend of abrasives, cleaners, and lubricating oils. The cleaners help remove dead, oxidized paint while the abrasives level scratches and severe swirls. The oils help lubricate the abrasive particles to minimize hazing, though some hazing is expected and easily removed with the next step, XMT Ultra Fine Swirl Remover #1.

Because of the strength of XMT Heavy Duty Swirl Remover #4, we recommend that you apply it with a white polishing pad. Only in extreme cases should a orange light cutting pad be used.

12 oz. XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you canít see them with the naked eye. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jewelerís rouge, XMTís Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new. XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to show signs of age. It can also be used as a finishing polish after XMT Heavy Duty Swirl Remover #4.

12 oz. Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, haziness, and overall dullness Ė to increase depth and clarity. At the same time, a layer of carnauba bonds to the paint surface to further enhance the dynamic shine created by the glaze. What canít be removed with the cleaners is filled in with carnauba to create a smooth, flawless finish. Itís perfection and protection in one! Use XMT Carnauba Finishing Glaze as the finale to your detailing process. To increase depth and brilliance, top the glaze with Pinnacle Signature Series II (not included).

6.5 inch CCS Orange Light Cutting Pad
Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. Itís an all around pad that will work on most light to moderate imperfections. The CCS orange pad is an ideal choice for applying XMT Intermediate Swirl Remover.

6.5 inch CCS White Polishing Pad
Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners. Apply XMT Ultra Fine Swirl Remover with the white polishing pad.

6.5 inch CCS Gray Finishing Pad
Apply XMT Carnauba Finishing Glaze with a gray foam pad. Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

2 Microfiber Towels, 16 x 16 inches
Constructed of the finest quality microfibers the Detailing Towel sets the standard with an outstanding 80/20 blend of polyester/polyamide filament, woven so densely they boast over 200,000 strands of fiber per square inch of fabric! These strands are nearly invisible to the naked eye, and are 100 times smaller than a human hair! Use this cloth for cleaning, buffing, and wiping away wax.

12 oz. Pinnacle XMT Polishing Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep the pad for polishing. The rich lubricants instantly penetrate the pad, softening and conditioning the material. Even if the pad has never been used, it will glide across the paint like youíre halfway through the detail session.

Polish ĎN Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around trim and mirrors, places that your polisher canít go. The foam applicator has gray finishing foam on one side and orange light cutting foam on the other. This is two applicators in one!

All pads included in the XMT Heavy Duty Swirl Remover Complete Kit have hook & loop backing, which attaches securely to a 5 or 6 inch hook & loop backing plate. The 6.5 inch pads in this kit are intended for a dual action polisher, such as the Porter Cable 7424.

Use the products as follows:
  1. Prep pads before polishing with Pinnacle XMT Polishing Pad Conditioner. On significant swirls and flaws, apply XMT Heavy Duty Swirl Remover #4 with the orange light cutting pad. (If you are unsure of the severity of the flaws, start with a white polishing pad. Step up to the orange pad if necessary.) Use XMT #4 only on problem areas to avoid unnecessary compounding of healthy paint. Buff off residue after each section.
  2. Apply XMT Ultra Fine Swirl Remover #1 with the white polishing pad or the Polish ĎN Wax Applicator. You can do an all-over polish to remove the lightest imperfections with this gentle swirl remover. Buff off residue after each section.
  3. Your paint should be in great shape at this point. Apply XMT Carnauba Finishing Glaze with the gray foam pad. Buff off the residue as you complete each section.
  4. Your vehicle will be glossy and reflective after applying the glaze. For the deepest shine and longer-lasting protection, apply your favorite wax. We recommend Pinnacle Signature Series II Carnauba Paste Wax for a fantastic reflection on any color.
  5. Clean each pad after use with Pinnacle XMT Polishing Pad Cleaner. Spray each pad generously with the cleaner and toss them in a bucket of clean water. Agitate with a Foam Conditioning Brush if necessary. Rinse well and let air dry.
The Pinnacle XMT Heavy Duty Swirl Remover Complete Kit is an exceptional value, particularly compared to the price of repainting. With the power of XMT Heavy Duty Swirl Remover, this kit can cure your vehicleís worst paint problems to restore the showroom gloss.

Kit includes:
12 oz. XMT Heavy Duty Swirl Remover #4
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
6.5 inch CCS Gray Finishing Pad
2- 16 x 16 inch Microfiber Towels
12 oz. XMT Polishing Pad Conditioner
Polish ĎN Wax Applicator

A total retail value of $116.40, you SAVE $26.41!

Pinnacle XMT Heavy Duty Swirl Remover Complete Kit with FREE BONUS
Item #XMT-9600-CCS
Rating:
Our Price:$89.99
AvailabilityUsually ships the same business day
Enter Quantity

Product Reviews for Pinnacle XMT Heavy Duty Swirl Remover Complete Kit with FREE BONUS

Related Items


Grit Guard Universal Pad Washer<font color=red> Free Bonus</font>
Grit Guard Universal Pad Washer Free Bonus

$134.99
Porter Cable 7424XP Dual Action Polisher  <font color=red>FREE BONUS</font></b>
Porter Cable 7424XP Dual Action Polisher FREE BONUS

Retail Value $149.99
Our Price $129.99