The ultimate paint, glass, and wheel coating - by Pinnacle
Pinnacle Black Label Diamond Surface Coating is a ceramic coating that creates an extremely glossy, impermeable layer of protection on your vehicle’s paint, glass, and wheels. Formulated using the most concentrated blend of nano-glass ceramic particles available in a coating, Diamond Surface Coating shields your vehicle against UV rays, airborne contaminants, acid rain, road salt and other common pollutants that plague a daily driver. Spray and wipe application only takes minutes to apply and the protection lasts years!
Black Label Diamond Surface Coating is the most advanced coating the world has ever seen. Diamond Surface Coating provides the best protection possible on multiple surfaces, including paint, glass, and wheels. Treated surfaces will be well protected against the harmful effects of nature that daily drivers are exposed to, while exhibiting a shine that can only be attributed to a product bearing the Pinnacle name.
Hyper-concentrated formula means a single 8 ounce bottle will completely coat up to 25 vehicles!
Use Diamond Surface Coating on all hard exterior surfaces, including paint, wheels, glass, and chrome! Diamond Surface Coating forms a hardened glass membrane that fills in the microscopic pits, pores, creating a perfectly smooth surface that dirt cannot adhere to.
Use on paint
When used on painted surfaces, Diamond Surface Coating provides protection that lasts up to 3 years! As soon as you spray Diamond Surface Coating onto your vehicle’s paint, it begins to create a hardened glass membrane that is impenetrable to dirt and contaminants. The surface tension created by this hardened glass membrane is so immense that water beads up and rolls off as soon as it makes contact, taking dirt and grime with it. Your vehicle’s paint will exhibit an extremely glassy, liquid shine. What’s more, Diamond Surface Coating was formulated so it can be topped with your favorite Pinnacle paste wax.
Diamond Surface Coating is resistant to extreme temperatures, making it the perfect wheel coating for brake-dust laden sports cars. Use Diamond Surface Coating on the face of your wheels, between the spokes, and in the wheel barrel to protect against the harmful affects of ferrous (iron containing) brake-dust particles. Treated wheels will only require soap and water to clean. Application on this surface lasts up to two years.
Use Diamond Surface Coating on exterior glass surfaces to create a super slick surface that rain, sleet, and snow cannot adhere to. Since the formula goes on crystal clear, you don’t have to worry about the streaks, smear, or haze that is normally associated with conventional oil-based glass sealants. The surface tension created by Diamond Surface Coating causes water to bead up and roll off at speeds in excess of 30 mph, rendering your windshield wipers virtually unnecessary. Treated surfaces can be easily cleaned using water alone. Application on this surface lasts up to 18 months..
Black Label Surface Coating replaces the need for 3 separate surface-specific coatings. Its unique formula was designed to bond to painted, metal, fiberglass, and silica-based surfaces. The hyper-concentrated formula will yield dozens of applications on each respective surface, making it an excellent value. As with other surface care products that bear the Pinnacle name, Diamond Surface Coating creates an extremely glossy shine that must be seen to believe.
Black Label Diamond Surface Coating should only be applied to vehicles that have first been polished with Black Label Surface Cleansing Polish. This step is crucial as it removes contaminants, oils, and fillers that would otherwise prevent the coating from bonding. Once that is completed, application of Diamond Surface Coating is as simple as spraying on and evenly distributing with a foam applicator. Wait 24 hours before topping with your favorite carnauba paste wax. Use Black Label Diamond Coating Shampoo to rejuvenate the shine and water beading.
Check out the Black Label Diamond Coating Application Guide for more thorough instructions on how to apply the coating.
- Ensure surface is cool to the touch and out of direct sunlight.
- Place your hand in a plastic sandwich baggy and feel the surface. If it feels rough or gritty, use Pinnacle Ultra Poly Clay.
- Polish the surface using Black Label Surface Cleansing Polish. This step is crucial as it removes polishing oils that would otherwise prevent the coating from properly bonding.
- Working one panel at a time, spray Diamond Surface Coating directly onto the surface and evenly distribute using a Lake Country Coating Applicator.
- Work the coating into the surface until it disappears.
- If high spots occur, lightly buff with a clean, soft, lint-free microfiber towel.